The scope of the aerosol extinction DYNAMECO generators.
All Generators DYNAMECO extinguisher can be used according to your purpose for living extinction floods and / or object based on the areas of electromechanical systems and equipment, power generation, transportation machines, data processing, communication and kitchens.
If used for room flooding, the volume of the entire room will be flooded with the extinguishing agent. The fire will be extinguished by a constant distribution of extinguishing agent (aerosol), regardless of where the fire inside the room.
The object of extinction method directs the aerosol flow to the source of fire and extinguished the fire. Typical applications are flammable liquids (gasoline, oil) in machinery, systems and devices.
Furthermore, the extinction of a combination of floods and room-based object can be provided, depending on each application (wind power plants, for example).
The exact design of the fire extinguishing system is based on local knowledge and sources of risk. The interpretation of the extinguishing agent is performed with room flooding, by volume, with room and object-based extinction by specifying the object to be protected and the environmental conditions prevailing.
DYNAMECO applications in wind power plants
Recently, lightning strikes, oil and cable fires have caused many fires in wind energy plants. As the fires in the pods of wind power plants can not be extinguished by the fire service background, as a rule, these plants burn out.
The injury to operators and safe is enormous. DYNAMECO fire extinguishers are used in three areas of risk of wind power plants.
In the area of the pods in the transformer room and lockers inside the switch. Low weight and small installation and no unnecessary pressure vessels and pipes are the requirements for fire protection in wind power installations, the fire DYNAMECO perfectly fulfilled.
DYNAMECO application in harvester
If used and / or negligently maintained, harvesters and other locomotives pose some significant risks of fire, which sometimes is even higher due to a highly flammable. In agriculture, the fire almost all causes of loss of all machines, interests and agricultural buildings. Such damage can threaten the existence of a company.
Harvesters are presenting a high risk of fire. The most common causes of fire are defective fuel and hydraulic lines, hoses, insulation, packaging and storage of highly flammable powder, meal and oil on hot engine parts.
Extinguisher DYNAMECO generators are very efficient extinguishing appliances of any danger area of harvesters. DYNAMECO 200-E02 and
DYNAMECO 300-E02 are used depending on each system and concept. They can be triggered manually by the driver's cabin or by an automatic system.
DYNAMECO application to change gears
Statistics show that nearly 32% of fires are the result of an electrical installation. The electrical switching cabinets and changing facilities with their active and passive components represent a substantial potential risk.
A fire can spread through the offices of fire loads of cables and pipes for the main rooms. DYNAMECO Generators are flooding extinguisher cabinets or control centers inside the room because that is where they normally originate.
The generators can be installed internally or with an external device blowing, blowing the aerosol through a duct in the cabinet. The switching cabinet is extinguished in a few seconds.
DYNAMECO is highly efficient and accessible extinguishing agent for cabinets and electric control rooms.
DYNAMECO
Rua: Raul Dias, 246-Santana São Paulo - Brasil www.mrincendio.webnode.comDynamit Nobel MR Sistemas F: 11-41066919 nextel: id: 82 * 14415 CEL: 11-83635781 E-mail: mrincendio@hotmail.com